Guide

Van, Luton, rigid or artic: choosing the right vehicle for a load

The cheapest vehicle that safely and legally carries your load is usually the right one. This guide compares vans, Luton boxes, 7.5 tonne trucks, rigids and articulated trucks on payload, pallets, licence category and access, so shippers can book sensibly and hauliers can explain what they need.

Last updated . Load Éireann is in a closed pilot: registration is limited to approved participants.

The five classes at a glance

These figures are typical, indicative ranges used by Load Éireann, not legal limits. The actual payload depends on the specific vehicle’s plated weights and any body, tail lift or refrigeration unit fitted, so always check the vehicle’s own documents.

Typical payload, pallets and licence for each vehicle class
ClassTypical payloadTypical palletsLicence
Van400 to 1,400 kgUp to 3Category B (up to 3.5 t)
Luton800 to 1,300 kg4 to 5Category B for a 3.5 t Luton
7.5 t truck2,500 to 4,000 kg8 to 10Category C1
Rigid8,000 to 18,000 kg14 to 18Category C
Artic24,000 to 29,000 kg26 to 33Category CE

Vans: small loads, tight access, same day

A van suits parcels, a few pallets, tools and urgent same-day jobs, and it can go where a truck cannot: narrow streets, residential deliveries and sites with low access. Payload is the limit, and a heavy load can use up a van’s payload before it fills the space. A category B licence covers vehicles up to 3,500 kg gross vehicle weight, so most vans need no HGV licence.

Luton: bulky but light, often with a tail lift

A Luton box carries a lot of volume for a vehicle that is still a van in licence terms when it is a 3.5 tonne model. Furniture, retail stock and moves suit it, and a tail lift removes the need for a loading dock. Heavier box vehicles of 4.5 tonnes and over need a C1 licence, so confirm which you are booking.

7.5 tonne, rigid and artic: pallets and weight

  • 7.5 tonne trucks bridge the gap between a Luton and a rigid: roughly 8 to 10 pallets and a payload in the low thousands of kilograms.
  • Rigids carry about 14 to 18 pallets and heavier cargo for regional and national distribution, and need a category C licence.
  • Articulated trucks carry full-trailer loads of about 26 to 33 pallets and the heaviest payloads, with a category CE licence, and need space to manoeuvre and a suitable loading bay.

How to choose

  • Start with the weight, then check the pallets and dimensions. Whichever limit you reach first decides the class.
  • Check access at both ends: gate width, height, turning space, loading dock or tail lift.
  • Consider time: a van can do two same-day drops where a truck would need a day.
  • Do not over-order. A bigger vehicle costs more per kilometre, and a half-empty artic is rarely the cheapest option.
  • Special requirements, such as refrigeration or a tail lift, narrow the field. Say so in the posting.

How Load Éireann uses vehicle classes

Loads and vehicles carry a class, so a job can be limited to vans, payload is shown in kilograms for vans and tonnes for trucks, and backload searches default to a radius that suits the class. The route cost calculator uses class-specific assumptions for fuel, maintenance and fixed costs too.

This guide is general information. Weight limits, licence categories and operator licensing rules depend on the vehicle and the goods: check with the Road Safety Authority or your adviser.

Frequently asked questions

A 3.5 tonne Luton can be driven on a category B licence. Heavier box vehicles of 4.5 tonnes and over need category C1.

See it with sample data

The live demo is read-only and needs no sign-in. Try the load board, tracking, warehouse and API screens.